TechnoKontrol Alloy Safety products are a unique non-combustible material consisting of a specially designed metal alloy mesh mechanically produced via a patented three dimensional production system.
TechnoKontrol Safety Technology Alloys, panels and safety technology systems are comprised of patented alloy material manufactured in a three dimensional manner mechanically produced into a mesh, ball or textile format to form a unique non-combustible material that is Fire, Blast, Moisture, Corrosion, heat, sound and electromagnetic wave resistant depending for its final usage.In the case of blast, fire, heat or explosions TechnoKontrol Safety Technology Systems will perform as no other product in the market, especially, in the oil-gas-chemical industries.
As mentioned above, the TechnoKontrol Safety Technology Alloy stops the explosion of any tank filled with gasoline, diesel, gas, petroleum or any other type of flammable, gaseous or liquid substance.
In addition our TechnoKontrol Alloy only consumes(volume) a minimum 1% of the overall tanks capacity when using the net and 1.5% when using the balls. Therefore, if a 100 litres tank is filled with our alloy net, the tank has a capacity of 99 litres, and if filled with the balls, it has a capacity of 98.5 litres. Thus our TechnoKontrol Safety Alloy completely avoids the oxidation within the interior part of the tank,(if tank is new or stops increasing oxidation if already an used tank) and in turn stops explosions 100% of the time.
Technokontrol TK-Alloy Safety Products can be purchased in either ball or mesh format, however, for easy application we recommend the use of TK-Ball format as its much easier, quicker and applicable then the TK-Mesh format. The TK-Ball format can be introduced into any fuel can, fuel powered motor engine fuel deposit (motorbikes, motorboats, light aircraft, grass cutters, leaves blower, tree cutters, etc...), by hand. (Please refer & study all Health & Safety instructions before use).
|TK-BALL FORMAT (15 LITRES)||K15B (Please refer to catalogue).|
|TK-BALL FORMAT (35 LITRES)||TK35B (Please refer to catalogue).|
|TK-MESH FORMAT(25 LITRES)||TK25M (Please refer to catalogue).|
|TK-MESH FORMAT(50 LITRES)||TK50M (Please refer to catalogue).|
|TK-SAFETY ALLOY SPECIAL||Can be purchased in larger amounts and packaged up to 1000 litres boxes for airfreight or courier delivery|
Technokontrol Safety Technology Alloy is lightweight, flexible and recyclable.
Our TechnoKontrol Alloy TK-Ball & TK-Mesh is exceptionally flexible, resistant to heat and once installed requires very little maintenance even within the most aggressive of atmospheres.
As per our Mission Statement, at Techno Kontrol we are constantly reinvesting into our Research; Development and Investigation departments so as to be able to adapt our patented alloy and manufacturing systems in order to continually expand our product lines. The following are just three examples of where you can find our specially designed products today;
In the case of fire prevention and explosions please read the Physical and Chemical Characteristics of Techno Kontrol which can be found within the How Techno Kontrol Works Section.
Technokontrol Manufactures, Designs & Researches our safety products in the European Union at the highest possible International Accident,Health & Safety standards which in many cases we surpass present regulations.
Prevent deflagration explosions due to combustible dust particles, gases or vapors with NFPA 69. Combustible dust, gases and vapors produced in industrial settings can pose a significant safety hazard.NFPA 69: Standard on Explosion Prevention Systems offers definitive guidance on explosion protection and prevention systems.
An independent federal agency investigating chemical accidents to protect workers, the public, and the environment.