TechnoKontrol | Roof-Ceiling Systems

TechnoKontrol Helipads

TECHNOKONTROL HELIPADS & HELIPORTS is a sector of Technokontrol Technologies specialized in safety, security, efficiency, environmental technologies in all petroleum, technology based sectors and also in the design, construction, installation of surface heliports, rooftop helipads, offshore helidecks, and private airports.

Technokontrol Helipads provides complete ‘key in hand-full operations’ consultancy, engineering, and equipment services in compliance with CAA and FAA/EASA Airport and Heliport guidelines.

We offer an extensive track record and expertise in developing the finest landing platforms.

  • Surface Heliports – Day or Night compliance. – Law Enforcement Heliports.
  • Rooftop Helipads – Corporate, Hospital Medi-vac. – Military Helipads.
  • Off-shore, up/down stream Helidecks – Ship boarding, Offshore Oil Rigs, Off-Shore Platforms. – King Shark/King Killer Whale Vessels Helicopter Carriers Units.
  • Private Airports – Day or Night compliance. – ELZ(Emergency Landing Zones). – OLZ(Operational Landing Zones). – ELLZ(Emergency Logistical Landing Zones).
  • MLZ(Mobile Landing Zones).

Technokontrol Helipads & Heliports services cover Design, Planning, Engineering, Project Management, Operations, Government Clearances.

The company also supplies essential supporting equipment including lighting systems, fire suppression, navigation and communication aids, wind indicators, safety net, slope indicators and hangars.

Technokontrol Technologies also being a global market leader in safety, security and efficiency technologies has the great advantage of designing our “Helipads and Heliports” at the highest European Union, UK Health & Safety Platform related Directives within the design, manufacturing and installation of additional but now becoming mandatory “Health & Safety Regulations” in these industrial, exploration, extraction, petro-chemical, industrial, logistical sectors and industries.

Any type of off-shore platform related accidents or incidents may occur as being caused by gas, fumes, toxic vapors, fire related incidents where these platform´s “Emergency Exits-Helipads” may be put into danger for the immediate aerial, naval evacuation or emergency use, due to these before mentioned issues but also due to platform climatic damage(storms, hurricanes, tsunamis, etc), accidents, fires, gas, petrol-chemical leaks, ignition and hot points, platform malfunction, platform or drilling ignited explosions, sabotage, terrorist & piracy attacks, etc.

HELI-TECHNOKONTROL Platform Safety Recommendations

We have firm evidence that protecting a platform can save lives making it a secure “Emergency Exit Route”, however, we have discovered that during the platform operational use there can be a slow but continues accumulation of mainly flammable, petro-chemical fumes or vapors which in many cases are slowly located, stored in many different platform areas or sections. Due to these gases or vapors being accidentally introduced, spread, stored, located due to operational leakages especially in and around the “platforms bases, legs, internal rooms, sectors, pipelines, operational servicing areas, etc” thus with a simple and accidental “spark” these gases/vapors are then ignited thus causing an explosion or platform fire as has happened in many occasions including storm electrostatic charges-lighting can ignite these gases with a platform even human made electrostatic strike/spark/ignition at any time.

Thus the use of Technokontrol products and services not only being used in the “helipads or heliports” but also in many other areas of the “platform Safety” to assure the highest of Health & Safety levels” for the benefit of the employees safety but also to the “operators”, due to also avoiding accidents, environmental damage, loss of revenue, and worst of all extremely high financial compensation packages, as happening in the BP Mexico Sea platform accident where the cost of the damages runs now into the billions of USD without taking into account the time required to return to pre-accident environmental levels and also the “blackout” of BP trying to obtain future operational licenses in the USA and without forgetting the “media backlash” which only can damage the corporations image, good governance and future credibility in all sectors but especially in “Health & Safety”.

Please view this link:

Technokontrol Helipads & Heliports, provides an unique “key in hand” solutions in Design, Planning, Engineering, Project Management, Operations, Government Clearances, and Equipment.

Site surveys

Our technical representative checks the topography, conditions on the ground, proximity of obstacles, operational and technical features, to provide an initial assessment of the location.

Feasibility studies

Feasibility study is the first step in initializing a project. The site survey is followed by a preliminary report – which details the findings of the visit and outlines the design requirements and recommendations for completion of project. At a later stage and on the basis of analysis made, a technical report – is prepared which covers every aspect of the project: i.e. Heliport Design, Landing Platform Characteristics, Obstacle Clearance and Limitations, Approach and Take off paths, Load Calculations, Civil Work and Engineering, Equipment, etc…

Obstacle Survey

This is an important phase in implementing a project since it is required by CAA for site approval. We survey the distance and heights of all obstacles likely to interfere with the heliport/airport. It includes survey of approach and take off path – supply of survey technical report – supply of survey aeronautical charts – supply of approach and take off aeronautical charts with approach and climb surface funnels and cross sections. Our survey team needs 15 days notice to schedule your survey.

Design

Our heliport designs are CAA and EASA/FAA compliant. For each performance class helicopter the size of FATO, TLOF, and Safety Area are calculated. Similarly obstacle removal and limitations around the heliport are defined. Approach and take off path follow slope and divergence guide lines given for VMC or IMC conditions. On completion of our technical report a complete set of drawings is supplied to our clients.

Project Management

We have experience in both “turn key and project supervision”. If you have the capability to undertake some of the work we can also adapt our services to the areas required by you, and help you supervise your project in order to meet the deadline.

Equipment
  • Lighting
  • Landing Dolly
  • Fuel / Water Separator
  • Fire Netting
  • Wind Cones
  • Anti-Thermal & Anti Fire “Panic Rooms”
  • Anti–Thermal Helideck base and Anti-Fire Helidecks base and Structure Protection.
Government approvals

Government clearance plays a crucial role in operating a heliports,/Heliports. NOC’s are required from different departments ( MOD, EASA, CAA, FAA, depending on nation regulations, etc) and we act on your behalf to obtain all clearances from site approval to license application.

Operations Manual

Every heliport requires an Operation Manual for licensing. It describes heliport physical characteristics, identification, facilities, and recommended practices. Special operating procedures specify recommended approach and take off path according to wind data and terrain in the vicinity of the heliport.

Engineering

We provide the civil work and engineering of your landing platform i.e. design, construction, assembly, equipment installation, etc… If you have the capability to undertake some of the work we supply the required manufacture design and thus help you reduce the costs.

Equipment > Technokontrol-Technoled LED Lights
  • Perimeter Lights
  • Beacons
  • Flush Lights
  • Pilot Lighting
  • Flood Lights
  • Obstruction Lights
  • Windcones
  • Lighting Package

Technokontrol-Technoled LED lights

The world’s leading Heliport company now offers the best LED light on the market at the best price. Perimeter lights (shown) and obstruction lights are available in ground or pole mount styles.

LED LIGHTING SPECS
  • Surface mounted height: 7 1/4″
  • Pole mounted thread: 1″ NPT
  • Surface mounted diameter: (3) 5/16″ holes on 5 1/4″ bolt circle
  • Lamp: 50,000 hour
  • Power: 120/230 VAC
  • Frequency: 50/60 Hrz
  • 0.14 amps @ 120V
  • Finish: Yellow powder
  • Lens: High tempered glass
  • Surface mounted height: 7 1/4″

PERIMETER LIGHTS

The TK-Helipads perimeter lights are an economical way to mark your helipads perimeter. Proven, tested design is ideal for remote locations and help the pilots safely land in all weather conditions.

Weatherproof and virtually maintenance free, FEC heliports perimeter lights can be surface mounted or used with one inch conduit.

LIGHTING SPECS
  • Surface mounted height: 7 1/4″
  • Surface mounted diameter : (3) 5/16″ holes on 5 1/4″ bolt
  • Pole mounted thread: 1″ NPT
  • Lamp: 8000 hour, 69 watt
  • Power: 120 VAC or other
  • Finish: Yellow powder coat
  • Lens: High tempered glass
LIGHTING FEATURES
  • FAA approved magnifying lens
  • Completely wired
  • Bulb included
  • Easy bulb replacement
  • Years of no maintenance

BEACONS

TK-Heliports designs, manufactures and installs a variety of Beacon lighting options. High powered 500 watt identification beacons, with our unique adjustable flash rate, provide long range visibility, even in heavily lighted areas.

TK-Heliports three color beacon are designed to simulate the traditional rotating beacon but with no moving parts. This means less cost and longer life for the customer.

BEACONS LIGHTING SPECS
  • Lens: High Tempered Glass
  • Finish: Powder Coated Yellow
  • Power: 120 VAC or other
  • Lamp: 500 Watt Halogen
  • Flash Rate: Adjustable
  • Housing: Cast Aluminum
  • Pulsing Circuit: Solid State
BEACONS FEATURES
  • FAA Approved Lens
  • Completely wired
  • Bulbs included
  • No moving parts
  • Excellent Long Range visibility
  • Easy to install

FLUSHLIGHTS

Low Level Omnidirectional Lighting, Safe to Drive Over, Only 1 1/2″ above surface, Double Gasketed Weather Tight, Easy Installation, Available in Amber or Aviation Green Mount in concrete, dirt or aluminum.

FLUSHLIGHTS LIGHT FEATURE SPECS
  • Housing: cast aluminum
  • Guard: cast aluminum
  • Lens: high tempered
  • Glass Lamp: 2,000 hr., 60-75 watt
  • Power: 120 VAC or other
  • Top Flange: 8 inches
  • Base Diameter: 4 1/8 inches
  • Depth: 4 13/16 inches
  • Weight: 9 pounds
  • Finish: Yellow Powder Coat
MOUNTING CAN SPACES
  • Housing: PVC
  • Base diameter: 7 1/4″
  • Top Flange 10″
  • Depth: 6”

PILOT CONTROLLED LIGHTING

By installing pilot control LED lighting at your heliport, any inbound pilot can activate the lighting equipment by simply keying his microphone on the proper VHF frequency. With the FAA approved controller, a second and third circuit may also be activated to control intensity, additional lights, or other equipment. Frequency selections available.

CONTROLS HELIPORT LIGHTING FROM HELICOPTER

  • Maximum utilization of lighting equipment
  • Saves electricity, bulbs and maintenance costs
  • Unattended all-weather operation
  • Simple installation
SPECIFICATIONS
  • INPUT: 120 VAC+20%, 50-60 HZ
  • OUTPUT: 5 amp relay contact
  • SIZE: 10″ W x 12″ H x 5″ D
  • MOUNTING: Any flat surface
  • WEIGHT: Approximately 15 lbs.
  • TEMPERATURE: -55 C to +55 C
  • FREQUENCY: 118-133 mhz (as specified by customer)
  • ANTENNA: VHF whip or remote available.

FLOODLIGHTS

Heavy-duty, hooded surface floodlight illuminates the deck and protects the pilot from glare while landing on the pad. Fixture is housed in a weather tight, aluminum casting and is powder coated yellow for high visibility.

Scroll to Top