TechnoKontrol | The Eagle Eye II – Crop Buster

TECHNOKONTROL AVIATION

TECHNOKONTROL AVIATION–EAGLE EYE II-CROP BUSTER

Crop Dusting aerial application is a sophisticated and rapidly growing industry especially made viable using our TK-Crop Buster –Eagle Eye II

The History of Aerial Crop Dusting

The first known aerial application of agricultural materials was flown by John Chaytor, who, in 1906, spread seed over a swamped valley floor in Wairoa, New Zealand, using a hot air balloon with mobile tethers. The first known powered aircraft to spread agricultural materials was a U.S. Army Air Service Curtiss JN4, or “Jenny,” piloted by John MacReady spraying lead arsenate from a makeshift metal hopper to kill catalpa sphinx caterpillars that had infested an orchard near Troy, Ohio in 1921. A subsequent study revealed that the pesky caterpillars were virtually wiped out from the application and “crop dusting” was born. The first commercial operation to lead the charge in aerial application was Continental Dusters, once part of Delta Airlines, using insecticides and fungicides to treat a host of crops and tackle insects and other infestations.

Today, organizations like the National Agricultural Aviation Association (NAAA) are working successfully to change this stereotype of the cavalier pilot. The mission of the NAAA has always been to promote and foster the development of aerial application and the significance that it plays on a global scale. Technokontrol Aviation always promoting research, new technologies and new application techniques, the NAAA has changed what it means to be a pilot. Education, training and safety are the highest priorities for the NAAA and Technokontrol Aviation. Its nearly 1,500 members and more than 350 pilots in the U.S. lobby for this niche flight industry and protect its growth by thwarting and abating certain governmental regulation that may hinder their field.

AERIAL CROP DUSTING THE SAFETY AND SECURITY IN GLOBAL FOOD PRODUCTION

From the ground up, pilots who are currently entering this industry are trained in all aspects of aerial application, safe pesticide use and entomology, all the while minimizing the risk to the environment. Without pesticide use, the world’s food supply would be reduced by 40 to 50 percent, resulting in an increase in food prices estimated at more than 50 percent.

To produce future foods, fiber and bio-fuels, increased production on the land already in use will be critical. The use of fungicides, insecticides and herbicides has helped to increase crop yields, allowing more people and animals to be fed and clothed. And it has opened the way for advancements in alternative energies. High-yield agriculture benefits the environment by producing maximum crop yields from fewer acres. Aerial application is a critical component in maximizing this production from the land used. For example, corn fungicide applications during the “tasselling” or pollinating stage of corn growth will produce more corn for the use of bio-fuels, food growth and livestock.

It’s estimated that, with the increase in the world’s population, food, fiber and bio-fuel production will need to double by the year 2050 to meet the growing demand. Due to the large economic growth and middle class surges in India and China—accounting for almost 40 percent of the world’s population—the demand for beef has grown tremendously. As the demand for meat rises, the demand for grain and protein feeds rises as well. It takes eight pounds of grain to make one pound of beef, so the demand for growth in grain production is at an unprecedented high.

“This technology in the thriving agricultural sector decreases poverty, increases national wealth, allows the state to reinvest in the sector and provides a better daily life for the people,” said Dan Glickman, who served as Secretary of U.S. Department of Agriculture from 1995 to 2001, speaking to the Chicago Council on Global Affairs about the need for renewed U.S. leadership in long-term global development. A grant from the Bill and Melinda Gates Foundation will aid the Council’s age development project. “It is in the direct interest of the United States to help as many nations as possible as it is in line with our foreign policy, economic development and humanitarian goals.”

The use and development of pesticides and other agricultural application materials comes with its share of environmental concerns. Spray drift, soil contamination, water pollution and occupational disease (often in the form of increased risk to cancer) are a few. Increased environmental regulations implemented by the FAA and EPA in recent years have reduced emissions and dangerous contaminations. In order to stay current, aircraft and equipment in the age industry are state-of-the-art. Crop-dusting planes today have on-board computers that monitor the rate of application and GPS units to make each field pass more accurate.

Recent technology developments such as GPS swath guidance, aerial imaging and prescription mapping and dispersal systems, have revolutionized the discipline. Fertilizer prices have increased due to the demand, and operators and legislators are looking for a balance between environmental impact and operation cost. Therefore, manufacturers of application systems and aircraft are designing equipment that is aerodynamically “clean,” including optimal boom and nozzle placements resulting in a more predictable spray pattern that appeases both the client and the regulatory agencies.

Companies as us at Technokontrol Aviation, use and develops its own precision GPS systems, which are producing GPS systems that provide guidance accuracy within three feet and guide the pilot using a light bar and electronic mapping system. Technokontrol Electronics provides highly targeted infrared aerial technology that is essential in field mapping and additional research and development of variable rate nozzles is helping growers achieve higher yields, quality and profit. Also, electrostatic targeting dispersal equipment is starting to make its way into development.

Many pilots are trained from the ground up, literally, loading the aircraft for the day, understanding the intricacies of the application systems and aircraft, all the while obtaining the training and flight certification to earn the insurance for a career position.

In the USA the FAA requires 500 flight hours for normal crop busting aircraft but using Technokontrol lightweight “Eagle Eyes Aircraft” one can obtain a pilot’s license with a minimum of 10-20 flying hours for an ultra-light type license for a 450-750kg aircraft depending on which country and with a minimum of 75 hours flying experience in other countries for a specialist crop dusting pilots license, however, different countries having different aviation laws and many emerging nations without any at all in these aerial-agricultural sectors but a pilot with a non-accident 75 hours flying record can be stated as a very well experienced pilot especially with our extremely safe and stable aircraft where safety is paramount as all safety measures must be surpassed for every ones sake as no accidents or incidents should never be caused due to the lack of experience or training.

This training process takes time, however with the increase in demand for food, fiber and bio-fuels, there is plenty of opportunity out there. Pay rates can vary from one operator to another. For newer pilots, you can get paid a percentage of the gross application or per-acre rate. Your overall experience, your total time in specific aircraft and knowledge of the application processes will dictate your success as an experienced pilot.

Technokontrol using its TK-Eagle Eye II- Crop Buster Aircraft can train inside the pilot training package of aprox. 75-100 training flying hours in all possible flight & climatic conditions to open the pilots mind to all different types of experiences from emergency landings, high winds, engine failure, low flight, crop dusting procedures but all of Technokontrol Eagle Eye II- Crop Busters have installed their own emergency aircraft parachute system to reduce any possible risks and even at this stage designing during 2013 the new incorporation of our “ unique” and first ever designed “aerial cabin airbag technology” which are activated when the parachute has been made operational or if the pilot believes that a crash or incident is extremely close thus again protecting the pilot if required and not being activated until the sensors being activated at impact thus saving its use on hard or difficult landings.

Due to many of the aerial incidents or accidents being then the base for an ignition point due to the incident/accident mainly due to the cause of physical fuel tank exposure, splitting of fuels tanks or even direct fuel explosions after impact, all of Technokontrols Eagle Eyes Aircraft have installed an unique, patented anti-explosion alloys protection technology installed which not only stop fuel tanks explosions, but also reducing fuel vaporization thus increasing fuel savings and longer flight range with the great advantage of having massive “sloshing reduction” which enables the aircraft to fly much more stable and even creating an easier crop dusting procedure/programme, low flight level aerial platform reducing risk due to climatic changes as side winds, storms or due to fuel or storage tank “sloshing” due to heat/humidity climatic changes at high or low speed crop dusting.

Please view:

TK-AVIATION ATOMISER/CBII AERIAL CROP DUSTING TECHNOLOGY

The TK-ATOMISER/CBII is a versatile electrically powered rotary atomiser designed for use on light aircraft as the Eagle Eyes II-Crop Busters made by Technokontrol and for other specialised applications. The atomiser uses a woven wire gauze cylinder to produce spray droplets within a narrow size range. The TK-Atomiser is ideal for the application of insecticides, fungicides and other products at Ultra Low Volume (ULV) and Low Volume (LV) rates in agriculture, migrant pest control, forestry and public health spraying. As the atomiser is driven by an electric motor, its rotational speed (and hence the spray droplet size) is independent of airspeed. The TK-ATOMISER/CBII should, therefore, be used instead of wind-driven atomisers in applications where an Eagle Eye II-Crop Buster is flown at a low or variable airspeed.

The TK-ATOMISER/CBII atomisers are available with an optional electronic speed controller and cockpit control box to vary the rotational speed and droplet size. Up to six atomisers can be used with one speed controller. These atomisers are manufactured from corrosion and chemical resistant materials and are compatible with a wide range of ULV and LV formulations. The TK-ATOMISER/CBII are supplied with diaphragm check valves and variable flow restrictor units for quick and easy adjustment of output rate, as well as a choice of boom clamps to suit different boom profiles and sizes.

An optional speed controller is also available.

  • Specifically designed for EAGLE EYES CROP BUSTER and specialised applications
  • Narrow droplet spectrum
  • Wide flow range
  • Ultra low volume (ULV) and low volume (LV)
  • Applications
  • Electric operation for constant rotational speed
  • Manufactured from corrosion and chemical resistant materials

Precise flow & unique flight control of dusting systems.

The flow to each atomiser can be controlled by a variable restrictor unit (VRU). This provides finger-tip control of the flow by the adjustment of a 7-position control knob.

VRUs are supplied with fittings and adaptors for the standard nozzle outlets found on most spray booms. This eliminates the need for any special pipework or modifications of the boom.

Overall flow from the aircraft is regulated by the boom pressure in exactly the same way as a conventional nozzle spray system.

The Technokontrol Electronics application monitor gives the pilot an accurate display of the actual application rate.

Optimal droplet size control

The TK-ATOMISER/CBII is designed to produce spray droplets within a narrow, controlled size range. This ensures accurate, efficient and cost-effective application of a wide range of products.

The droplet size can be varied by an optional electronic speed controller. This enables the pilot to ajust the rotational speed of the atomisers to produce the optimal droplet size for the product being applied and the operating conditions.

SPECIFICATION:

Weight:

2.0 kg complete with mounting bracket

Input voltage:

24 – 28 V DC

Input current:

6 A maximum

Mounting

By mounting clam-specify boom size and profile when ordering

Liquid throughput:

0 – 3.0 l/min per atomiser

Flow control:

By variable restrictor unit (VRU)

Liquid shut-off:

By diaphragm check valve

Rotational speed:

2,000 – 11,000 rpm (max) (adjustable when used with speed controller)

Operating airspeed:

0 – 240 kph

Droplet size:

45 – 120 μm VMD (when used with speed controller)

Positive shut-off

Chemical resistance, anti-corrosion, anti-vaporization, anti-sloshing and extended operational usage & applications.

These systems are built from materials chosen for their resistance to corrosion and the highly aggressive solvents used in some ULV formulations.

The TK-ATOMISER/CBII is compatible with ULV and LV products and can be used with a wide range of specialist formulations, including Bt, biological products, IGRs etc.

Technokontrol International Safety & Quality Standards

Technokontrol Manufactures, Designs & Researches our safety products in the European Union at the highest possible International Accident,Health & Safety standards which in many cases we surpass present regulations.

  • US NFPA-69-2008-Standards on Explosion preventing Systems
  • UK- SI 1982/630- Petroleum Spirit for use in motor vechicles & keeping in plastic containers.
  • EU- ADR Directive 1999/36-CE
  • ISO 9000-ISO14000-ISO18000-1SO23000(2012)
  • CE Certified Manufacturer.(2012)
Technokontrol Safety Technology Products and Systems are used, recommended or obligatory in many sectors:
  • Government Fire & Accident Authorites.
  • UK Health & Safety Authorities.
  • Chemical-Petroleum Industry.
  • Aviation Industry.
  • Maritime Industry.
  • Global food Industry.
  • Building Industry.
  • International Motor Racing.
  • International Power Boat Racing.
Scroll to Top