ANTI-BLAST
MOBILE PROTECTION SHIELDS & BARRIERS FOR RISK SCENARIOS
NEW
SECURITY & SAFETY TECHNOLOGY FOR THE PROTECTION OF BASES, CAMPS, OUTPOSTS,
INSTALLATIONS AND NOT USING PRESENT OPTION
AS THE NORM IN THE XXI CENTURY SECURITY SCENARIO
During many decades most
Military, Armed, Civil Protection Agencies have required the use of protection
barriers and protection shields which have mostly been covered by the use of
the very primitive “sand bag solution” which in many scenarios can be an option
due to cost, nil or low risk areas-deployment, easy access to engineering
-installation equipment for their use, filling, deployment, however, in many
new scenarios time is of the essence and these basic safety solutions have to
be upgraded to higher levels of efficiency, time saving, low engineering
requirements as with the use of our new
global safety & security technology
known as the “Mobile Protection Barrier & Shield Technology” patented by
Technokontrol R&D globally.
The old “sand bag system”
having the benefit of low cost but extremely expensive in man –labor hours with
also the great disadvantage as needing to being installed via the use of heavy
lifting machinery especially with the possible need to adapt, expand, reduce
future installations thus depending again on qualified heavy machinery
operators, fuel, logistics for the machinery and most importantly these sand
bags being transported to the location which again requires transport &
logistics to the designated base, camp, hospital, security outpost, just as our
own alternative thus requiring the same transport costs.
THE
DIFFERENCE USING TECHNOKONTROLS XXI SAFETY & SECURITY TECHNOLOGY IN THE USE
OF PROTECTION SHIELDS & BARRIERS AT GLOBAL RISK SCENARIOS
After an
in depth study in present safety & security shield systems and many high
ranking military enquires to find a solution, alternative, viable options we
have designed an extremely logical and pragmatic protection technology in which
one can decide from a basic technology solution to an extremely sophisticated
technology but all being easy in deployment, re-usability, easy transport, easy
storage and most importantly no heavy machinery, fuel, qualified machine
operators required as our alternative can be transported by hand between
several members of staff or using a trolley, wheel-pulley system if required.
Due to
having studied many warfare related documents we have found that the “sand bag”
option is extremely basic and the need of a much more advanced technology being
paramount especially when one is trying to protect is members of staff,
employees, assets, etc.
The
Technokontrol “Anti-Blast Mobile Protection Shield & Barrier” having their
name difference in the size of the final design thus the “Shields” being a more
personalized size while the “Barrier” being a more asset protection size, both
having heights of up to 2,40 meters as
to fit into an ISO standard container transport system.
The
technology introduced into these defensive, security, safety barriers &
shields being of XXI century and allowing any base, camp, outpost to have less
present personnel as being able in being manned via satellite, GPS, GMS and
from any global location thus obtain the benefits of lower personnel deployed
and being fully operational with low level man power to do basic maintenance
and only re-arming, munitions loading if and when required.
MOBILE
SAFETY &SECURITY SHIELDS/BARRIERS EXTERNAL & INTERNAL DESIGNS
Each
barrier/shield has the great benefit of being installed, deployed in minutes
thus only needing the opening of the “holding section” on the back-reverse of
the shield which should normally be inclined at a 20º angle, thus to deflect
incoming projectiles, objects and in extreme climatologically condition to
allow sand, dust, snow, rain to blow upwards and not increasing or creating
structural stress on the barrier.
Anti-Blast Barrier
Strong-heavy duty barrier structure
Viewfinders for camera & defensive equipment
Second level
Camouflaged retractable screen
Unfolded screen
The
shields & barriers have an open selection of widths, lengths, weight,
levels of protection and their composition are based on the risk factor,
weight, dimensions, thickness, weather conditions, etc. In many cases we use
anti-bullet textiles for the ballistic, shrapnel defensive sections of the
shields & barriers and also having incorporated anti-thermal, heat panels
to withstand heat, fire, blow torch, flame thrower attacks but incorporating
another of Technokontrol safety & security fire-heat protection panels which
withstand over 240 minutes of direct heat blast of over 1200ºC thus creating an
extremely well protected shield/barrier.
The
external covering of the shield/barrier which normally is of several
millimeters or centimeters of reinforced steel for projectile rebound,
penetration reduction, projectile-object speed reduction and with a covering of
a specialist chemical anti-adhesive paint to stop physical attempts for
climbing upwards on to the barriers.
Stand-by Shield
Shield active & ready for defensive operation
We also
cover the external part of the barrier/shield with a material which protects
the shields/barriers against corrosion, oxidation, electrical magnetisms but
also to create a cover as a “Teflon “ based chemical which will also stop the
physical possibility of an intruder trying to crawl up the barrier face even
though this would be extremely complex due to a number of protection,
detection, armament security systems incorporated in the barrier systems.
Protective layers view
Protective layers detail
This
anti-adhesive chemical-material also reduces molecular, climatological adhesion
such as dust, sand, rain, flying objects, debris and to which are easily blown
away and above naturally from the barriers.
Each
barrier section can be annexed to another barrier section even in an curve mode
which will allow the design of any barrier into curve, round, rectangle, square
shapes, designs, thus having curved sections available. The shield/barrier
sections having also the great benefit of having its own and individual “shock
absorbing” system.
Thus if
one section of the barrier being attacked the rest becoming independent and
thus only the attacked barrier absorbing and reducing stress levels thus
protecting the structural integrality of the other annexed sections thus
reducing the level of damage, damage and possible structural breaking between
barrier sections.
Anti-Blast Shield Deployment
Shield with unfolded camouflaged screen
Retracting camouflaged screen
Shield unfolding for operation
Opening viewfinders for observation & defense
TECHNOLOGY
INCORPORATED INTO THE MOBILE SAFETY & SECURITY BARRIERS/SHIELDS.
The
barriers have designed into its own design detection technologies as long
distance audio-visual cameras which have the technology for infra-red, night
vision, thermal, bad weather detection and most importantly tracking systems.
The
obtained data can be processed manually in situ or can be transmitted and
operated anyway on the planet as using similar to drone satellite technology
for its remote-long distance usability.
The
technology which can be installed with the audio-vision systems are also
atmospheric detection systems which will
enable the immediate detection of
chemical, bacteriological nuclear contamination and which due to the
design of the barrier system can be operated, manned even without personnel
thus any kind of detection, risk as before mentioned not being sufficient for a
base, camp, logistical site “emergency lock down” or “emergency
re-deployment” under and for any reason
and thus not putting at risk the possible loss of a base, camp, installation if
the present personnel aren´t fully equipped
or having sufficient defensive means in the event of this kind of attack.
DEFENSIVE-PROTECTION
TECHNOLOGIES-ARMAMENT SYSTEMS
Due to
the barriers being able to being deployed, used, installed in a provisional,
mobile, fixed manner and in many different kinds of scenarios, a defensive-protection
system can be installed, adapted, upgraded as when required by the user. In the case of a civil use against civil
unrest, rioting, criminal attacks the use of a defensive-protective technology
can be via the use, launching of riot control gases, plastic, rubber bullets,
sound blasting systems, water cannons, etc.
In the
event of a military, anti-terrorist scenario the use of armed systems is
paramount and to which a great portfolio of armament can be used from long
range sniper 0.50 caliber rifles, Gatling Machines Guns to multi-role grenade-rocket
launchers. Combination of all the above armament platforms are viable and being
used, incorporated depending on its location, range, type and level of risk.
Once the
camera-audio visual, long range detection systems have detected an incoming
person at a long range the operator at the base or via satellite can designate
the risk factor and thus activate an automatic defensive system in which any
intrusion will be dealt with according to the pre-set risk evaluation system.
This risk
evaluation system can be also upgraded, operated via remote thus again reducing
the human presence in each base, installation and only requiring personal for
the reloading of munitions and any low level damage repairs, maintenance which
may be required in the event of any level of attack.
POWER-ENERGY
SUPPLIES AND LONG TERM REMOTE OPERATIONS
The
design of this unique barrier/shield has also taken into consideration the more
than normal lack of easy available energy-power supplies as the norm and thus
being designed in being fully operational with power from the normal base power
supply chain as from diesel, fossil, electrical, fuel generators which is the
norm in most military, logistical bases, camps, strategic installations.
However ,
as we believe that in many scenarios a fossil based fully equipped power supply
isn´t viable thus needing an alternative, self sufficient energy-power supply
thus allowing the use of the barriers/shields electronics, telecommunication,
defensive systems regardless of the power supply and becoming a totally
independent operational defensive system.
We have
been able to design and incorporate into the design of the barrier several
alternative power sources thus using air from the incorporated air-flow
ventilation systems, reduced wind stress design which are located in the
barrier to allow any air-wind flow through pass through the barrier and thus
using this passing air in creating electrical power to generate sufficient
power for the normal automated barrier system operations.
Due to
never only depending on once source of energy creation, supply, transformation
we have also incorporated at the top, back part of the barrier solar panels to
also assist the “air flow energy
generation system” and also as there is a protection covering blanket at the
back of the barrier to reduce any filtering of light, shadows which could be
visible from the frontal part of the barrier (enemy vision)and with also its
use for the reduction of dirt, dust, climatologically damage of the barrier and
its electronics, mechanical systems it has also a solar power flexible covering
which again assists the other two power generating systems to create
alternative ecological power supplies never depending only on one system and
especially on fuel based energy supplies.
TECHNOKONTROL
OFFERS CUSTOM MADE UNIQUE DESIGNS FOR EACH CLIENTS NEEDS
At
Technokontrol we believe in unique, individual, custom made technologies thus
always being open to advise, assist, design any client to produce their own
individual safety & security products depending on their own experience,
know how, requirements , limitations, thus always reaching for the most
suitable, cost effective final product and then being able to combine any of our
technologies, systems, designs, patents into new individual products, systems,
technologies and thus creating each clients own individual solution to their
own problems, issues, requirements or needs at any level.
BARRIER /SHIELD PROTECTION-DETECTION TECHNOLOGIES CBRN (Chemical, Biological, Radiological, Nuclear)/ NBC (Nuclear,
Biological, Chemical) DETECTION SYSTEMS.
The” Barrier/Shield” design and
technologies also may include manual, automatic, remote, Chemical,
Biological, Radiological and Nuclear Defense Detection Systems which will detect and communicate these detected agents directly or via GPS,
GMS, Satellite to the Command Centre(CC) thus allowing immediate action taken
by the base personnel and making effective any contra attack planning and
protection programs.
The installation of these detection technologies inside the “Barrier/Shield” protection-detection systems
with their own automated, independent power supply, unique sensors and
telecommunication systems allowing continues, minute by minute data transfer
from any front line out post(OP), operational base (OB), Emergency landing
zone(ELZ), Landing Zone(LZ)to the Control Centre from the “Barrier/Shield” to evaluate the risk scenario without having large
numbers of personnel in situ, at risk and also reducing not only the exposure
but also the physical & psychological conditions of any personnel in using,
wearing, equipping themselves with the corresponding protection suits, equipment
and decontamination systems required for these possible scenarios.
The “Barrier/Shield” not only having already
installed long range vision, audio, night vision, infra-red, thermal, bad
weather imaginary, movement, vibration, tracking & armament systems, sound
detection technologies, but also having these CBRN detection systems incorporated
which will detect Nuclear (ionising radiation such as alpha or beta particles, gamma rays or neutrons), Radiological
(dirty bomb/salted bomb, which are not true nuclear weapons and do not yield the same explosive
power, they use conventional explosives to spread radioactive material, most
commonly the spent fuels from nuclear power plants or radioactive medical waste), Chemical(Chlorine, Diphosgene, Phosgene, Chloropicrin, Hydrogen cyanide, Cyanogen chloride, VX, Cyclosarin, Sarin, Soman, Tabun, Nitrogen Mustard, Sulfur Mustard (Yperite), Lewisite,
Phosgene
oxime) and Bacteriological agents-toxins or infectious agents ( Entomological (insect) warfare,
bacteria, viruses, and fungis, etc ).
These
immediate detection, data analyzing and transfer systems being paramount in any
high risk region and also preparing for any worst case scenarios even with the
immediate evacuation of the personnel or base, camp, outpost, etc.
As these “Barriers/Shields” can be operated
remotely the personnel emergency evacuation plan not meaning the loss of the
base, logistical installation, camp as these barriers are fully operational,
self sufficient and as already stated fully operational remotely thus being
thousands of miles away and having the full data input from vision, sound,
detection systems and most importantly having sufficient armament power to stop
long, medium, short distance attacks as the base can be designed and having
deployed these “Barriers/Shields” in
such defensive positions which will allow the corresponding armament systems to
operate fully up to 2km-4km mainly as
the use of long range 0.20/0.50 sniper caliber rifles with the combination of
medium-long range armament platforms as Grenade launchers with a short-medium
range machine gun/attack rifle platform or Gatling Gun will assure any
penetrated stopping of persons or vehicles thus having all the territory
covered, protected and only needing reloading manually of munitions when
running out.
Once
detected the low level of the munitions of the armament systems in each sector,
barrier, shield they can be reloaded by a minimum number of base personnel or
even by the strategic deployment-redeployment introduction-extraction by air of
personnel during short periods of time for such reloading and required maintenance
but all depending on the amount of munitions set up before a full base, camp,
outpost emergency evacuation. Having a well designed interconnected armament”
barrier/shield” system will allow the low usage of munitions and working
sections in a defensive positioning thus only using the minimum amount and
balancing the sections munitions levels, use, consumption to have an overall
balanced munitions usage and not over exposing one/several sections too much as
using other sections to cover this/these sections in the event of a multi-front attack thus
recommending the use of several “Barriers/Shields” in different locations,
sections, ranges, angles, etc.