TK Newsletter
TK-QSSHE / TK-Quality Security Health & Environment. Hotel Industry Compliance Certificate.
IN THIS ISSUE
2016
Technokontrol has presented the new 2016 certificate, seal and logos for the TK-QSSHE HOTELS/COMMERCIAL certificate, especially designed for the hotel, leisure, entertainment and commercial industries.
TK-Quality Security Health & Environment / Hotel Industry Compliance Certificate.
Click on images to enlarge
Due to the increase of the terrorist risk in soft locations as hotels, shopping malls, restaurants, airports, seaports, Technokontrol has reached an agreement with the top European Tour Operators, Government authorities, insurers and hotel groups to begin the issuance of the new TK-QSSHE certification directive in which the incorporated establishments have or are in the process of protecting their operational assets including fuel storage, power plants with the recommended safety and security technologies to guarantee the maximum levels of protection for their guests, clients, employees and corporate assets.
The risk of a terrorist attack, sabotage, suicide bombings increasing by the day and always wishing in being prepared for the worst case scenarios, these main tour operators,hotel groups, government authorities, insurers protecting their visitors,clients, employees, assets and commercial contracts with the most advanced, long term and environmental friendly safety technologies presented by Technokontrol exclusively.
The terrorist risk levels ever increasing due to the simple physical accessibility, low levels of fixed security protection standards, fabrication simplicity of homemade explosive devices,(I.E.D) which can be made with gas cylinders, petrol bombs and easily planted, activated, ignited in any hotel, shopping mall, airport fuel storage installations, which are all 100% refueled by fuel, gas, LNG, truck tankers.
Any truck fuel tanker, commercial fuel gas tank, fuel deposit with a normal capacity of 30,000 liters of fuels, LNG, heating gas, having in the event of an ignition, spark, armed attack, bullet shot, accident, a thermal, blast, fire, explosive and destruction range/power of a 200,000 TNT explosive and even the simple 30kg home gas cylinder having over 200 kilos of TNT blast.
As these storage installations, deposits, fuel tanks being mostly in open air locations and next to the hotels, shopping malls, public locations the need of anti-explosive protection being paramount and using Technokontrol Safety Technologies allowing the full deactivation, null ignition or even non-explosion of these storage facilities regardless of the amount, type of the stored fuels, thus rendering any accidental or intentional incident null and fully protecting the guests, employees and establishment against the type of incident.
The issuance and the certification will only be issued with full Technokontrol technical compliance and following top global USA & EU Safety, security and protection directives as set out by the USA-NFPA (National Fire Protection Association Codes 2008/2014 for the Prevention of Explosion Acts). All installations, services, maintenance programs and products being fully insured by AXA Group.
Click on image to enlarge
Read previous newsletters
Cleaner, natural gas engines for ships needing Technokontrol Safety Technologies in cancelling risk in vessel fuel gas tanks and LNG explosions, fires, sloshing and vaporization.
Technokontrol has developed a practicable natural-gas fuelling storage anti-explosion, anti ignition, anti sloshing system for current diesel-powered ship engines. This new advanced breakthrough is good for the environment and people – while helping the shipping market meet more stringent EU rules on sulphur emissions.
Researchers in Technokontrol R&D have developed over the past year a new IX Generation unique, patented fuel tank safety anti-explosion 3D alloy technology which enables the use of new, modern motor injection systems and other related technologies for using liquid natural gas (LNG) to fuel large two-stroke ship engines at the highest of HSE, SSHE, safety levels being protected against not only possible operational, climatic incidents but also terrorist and criminal attacks of the vessel globally.
The increase of gas powered shipping vessels being of great importance for the environment and also for the financials of any global operator as being the shipping market as “cut throat” as the aviation industry where every cent counts especially when it comes down to savings, efficiency, longer durability and operational expenses against investment/ROR.
However, all of these global manufactures having the same basic issue and need and this being “safety”, this is one word which cannot be forgotten as they all depend on the above mentioned operational points but without the most important point “safety” their technologies are of less value as all of these shipping contracts are agreed , approved by corporations with the highest levels and standards for corporate “Good Governance and Corporate Responsibility”. Thus not being able to avoid, downplaying the principal issue of SSHE,HSE, QSSHE, environment protection and now being even more important “safety-security directives”, due to the increase of possible terrorist risks as mentioned in the House of Parliament Piracy Report and in the Homeland Security Reports and Guidelines-API.
The use of Technokontrol Safety Alloys and technologies now not being only an option but should be mandatory as the only viable , adaptable, and long lasting safety technologies combining long term investment, efficiency and safety but also rewarding the designers, fabricators, clients other additional operational benefits as the total cancellation of oxidation, corrosion in newly protected storage tanks, the non-growth of algae’s in all types of fuels, reduction in fuel vaporization(environmental contamination) and anti-electrostatic properties which are the cause of nearly 50% of all fuel tank storage explosions, fires, incidents at global level regardless of having electrical-lightning safety systems which are obvious don´t work too well due to their past safety records.
No global corporation, national company, supplier, petrol chemical producer, logistical global operator, engineer, can ignore that if a 30kg home use gas cylinder has an explosion radius and destruction of a 200KG TNT explosive device what would be the outcome of an explosion in any global storage facility, port terminus, with hundreds of millions of liters of fuels, gases, chemicals surrounded by hundreds or even thousands of civilians, employees, homes, businesses?
As recently stated in the press in Malta where a new LNG jetty, terminus is being designed the level of destruction, damage of an accident would be comparable to 50 atomic bombs, regardless of the possible discussion if the destruction would be of 50 or 1 atomic bomb, we all agree that the destruction at atomic level would be massive. Strategic & infrastructure protection studies in Spain also stating the high risk of destruction at the main ports of Tarragona, Barcelona, Galicia, Cartagena which would also reach thousands or even hundreds of thousands of deaths, injuries, millions of Euros in losses in the event of a terrorist attack, accidental incident, climatic disasters.
One thing is not having the technology to avoid these safety, high risk issues and another is ignoring them thus as the law well states, “not knowing the law doesn’t mean you are exempted from it”, even though just at moral, ethical, human, or simple common sense all safety measures and technologies should always be implemented as one should only wish the same for oneself as for others and not waiting in becoming part of an avoidable incident with the knowing that a solution existed but was ignored. Without forgetting the legal, criminal and punitive damages which just during 2015 in the USA have been in the billions of USD, thus why not investing and protecting now than destroying and paying in the future?
That is why all new environmental, efficiency, cost cutting technologies also must be integrated in the best safety and security technologies available if we wish to strive forward for better and safer world. Thus being Technokontrol, a must for all of these new energy, efficiency, fuel storage technologies from vessel fuel tanks to gas cylinders or even being used in the new hydrogen auto cylinders. This is why Technokontrol Team will always be part of any new technological advancement as being our obligation as a technological and R&D corporation in doing so.
New Vessel Power Plants
New engine technologies in this field are being tested and implemented being one of the most advanced the LNG-fuel control system being the first in the world with two-stroke heavy marine diesel engines, and has generated commercial orders from shippers, stated by MAN Diesel & Turbo in Copenhagen.
MAN Diesel & Turbo has already launched the system on the ship market as an option for new ships and for existing ship engines. Orders have already been placed from companies in the EU, Japan and the US for 20 such dual-fuel engines, with options on 50 more in the offing, he adds. These engines will be built under the MAN license system in EU, Korea, Japan or China.
The orders include engines on 43 new vessels, of which 1 container vessel will be built in Croatia. Two of the engines will be retrofitted on a LNG tanker in Qatar. The retrofitting job will take about four weeks with a supervising team of eight people from MAN. All components of the “retrofit kit” will be manufactured in Europe.
- MAN B&W ME-GI Engines – Recent Research and Results
- Helios New Testing Fase
- New Era of Marine Propulsion
Cutting sulphur pollutants
The new engines are cleaner burning than traditional two-stroke ship engines running on heavy fuel-oil or diesel, and will help ship operators meet the EU’s tighter emission rules on marine sulphur pollutants. The rules come into effect from 2015.
These LNG-fuelled engines will also meet the even stricter regulations entering into force for the North Sea, the Baltic and the Channel, which are being designated “sulphur-emission control areas” with a limit on sulphur in fuel of just 0.1%.
Natural gas is a cleaner fuel than diesel and is free of sulphur dioxide. Sulphur is a major cause of acid rain, and as an air-borne pollutant contributes to a host of human health problems.
An engine fitted with what is known as M-type, electronically controlled, gas injection (ME-GI) technology also cuts nitric oxide and nitrogen dioxide emissions by 24% compared to a similar engine using only diesel or heavy fuel oil, according to tests carried out within the project. Emissions of carbon dioxide (CO2), a major greenhouse gas, dropped by 23%.
Engines the size of a four-storey building
We are not talking of a 1960s two-stroke motorcycle engine here . This could be a 14-cylinder diesel engine that is 28 meters long, 13 meters high and weighs over 2 000 tones. It is the size of a four-storey building.
While natural gas has been used as a fuel for four-stroke marine engines, to date a control system suitable for the low-rpm (revolutions per minute), two-stroke diesel engines that power 95% of vessels over 5 000 tones has not been available. Such engines typically run at around 100 rpm, often turning a single large propeller via direct drive.
Researchers have developed a new high-pressure gas-injection system for these large marine two-stroke engines. The engines are dual-fuel, running on either LNG or fuel oil. Electronic control-systems drive separate injectors for each fuel type.
The project also created a testing infrastructure for a diesel-gas engine which will be used in the coming years for further tests on gas supply technologies. Other engine components were also developed through the project, including:
- new piston rings for high temperature gas combustion;
- new gas injectors;
- new valves for high temperature gas combustion;
- new optic measurement tools (laser) for monitoring running engines.
Some of the new equipment was developed by universities (sensors) and SMEs (new injectors).
First on the market
Demand for the new engine as likely to build while fuel prices rise and emission controls become ever stricter.
The gas-burning engines tend to be more fuel-efficient than fuel-oil because of the higher calorific value of gas as a fuel. As the attractions of running on gas become clearer, more and more ports are being fitted with LNG refueling facilities to meet demand.
Technokontrol development programs used as bench marks for other technical safety manufacturers
Due to Technokontrol continuous investment in TK-Aviation safety R&D programs we have seen that our development programs are being used as bench marks for other technical safety manufacturers and especially aviation manufacturers around the globe whom are trying their upmost in increasing all together the levels of security and safety in all means of aviation, aerospace and emergency sectors incluiding HSE, SSHE, ASS, etc.
As seen we have been incorporated in an independent patent research program which Technokontrol has been designated and mentioned on pages p.16, p.19, p.24, p.25 and p.26 as being at the forefront with these other global fabricators.
Click on images to enlarge
Patent research pages
Not only is Technokontrol a corporate member of the Royal Aeronautical Society but we also to incorporating our specialist, unique, patented technologies as the non-explosive aircraft fuel tanks to the extreme high friction composite aircraft panels for emergency landings with wheels or operational undercarriage failure scenarios to the specialist bullet proof, light weight protection materials for high risk aerial operations in drone/human flown aircraft as used in the Alien and the Eagle Eye aircraft models.
Technokontrol has been awarded the prestigious joint No. 1 position in Spain as the Number One Technology Patent Corporation for 2013
TK-Fireproofing of structural steel & other materials in the construction industries
Bad Summer for stating that pipelines, fuel storage tanks, electric fuel powered power plants, sewage infrastructures, gas cylinders, “Never Explode!”
An extremely bad Summer for anyone stating that pipelines, fuel storage tanks, electric fuel powered power plants, sewage infrastructures, gas cylinders, “Never Explode!”
These several past weeks have been more than an eye opener to all of those people whom state with little or no knowledge that gas, fuel, petrol chemical, sewage infrastructures, road tankers, gas cylinders never explode.
Around the planet these past weeks we have all seen the intensity, exponential increase of human related incidents, operational accidents, terrorists attacks to which we can very sadly state will only continue to increase especially when our national infrastructures, crime and terrorist risk, wars, civil unrest only worsens by the day.
Every incident is a learning step and an eye opener for many of those people whom believe that the downfall of modern day society is their route to reach their own personal goals and the use of daily supply assets is becoming an extremely easy way to reach their objectives and even using them with a hidden agenda as one cannot relate to whom an “accidental incident” can be really related to.
Anyone with any political, religious, economical , environmental, social, corporate agendas can study, prepare, implement with very little funds and knowledge the use of this basic destructive acts and can cause any major disasters without the use of explosives, arms and even worse without being tracked by the law enforcement and secret services of any nation especially dormant terrorist cells. Who can stop the purchase of a simple gas cylinder?
Anyone with malice or ignorance can make this simple domestic gas cylinder become a 200 kilo TNT explosive without anything other than the use of a simple starting fuel to ignite a fire as a fuel jerry can with several liters of gasoline? Why aren´t the authorities not preparing for the worse even though having more data than ever with regards of terrorist attacks and their possible destructive strategies?
It’s very obvious that with the right safety integrated technologies and designed gas cylinders this wouldn´t be possible but there are always people stating that the use of gas cylinders as I.E.D. explosives in the developed World would be impossible but when one can see in any media network how these simple gas cylinders are being used as short-medium range mortars in the Middle East and also being used as an I.E.D.explosives in trolley waste bins one should begin to worry that as everything in our modern day society one being especially information has no boundaries and even less when they use this information to learn how to kill, injure, destroy our societies if not totally physically but continuously with the continuous media and internet bombarding using the warfare psychologically of fear and risk in the western World.
The Canadian Government has received from various environmental platforms a parliament request to stop all transport by rail freight of chemicals, fuels, gas related and explosive materials via the Canadian rail networks. Canada has seen a massive increase in rail freight through their rail networks and also have suffered with extremely high rail accidents which have reached over 100 deaths, hundreds of injured persons, distraught families and hundreds of millions of dollars of costs during the last 12 months. The increase of rail freight incidents has reached over 4,000%(Four thousand per cent) and after undergoing a very serious study of this exponential increase of incidents the bases has been found mainly in the use of old 1970´s rail networks, with no upgrading or modernization to withstand the ever increasing rail freight traffic especially with dangerous, flammable, explosive products, the use of again 1970´s unprotected, outdated rail tanker cars and even worse without any real safety technology installed to withstand a derailment, natural disasters, operational incident or similar.
During the last years more and more rail incidents, accidents have been finally found to have a political, economical, religious, criminal back grounds but have been stated and classified as being accidents to not increase the social, media awareness and worries of the increase of these means of transport incidents. However, when reports form modern, developed nations thus believing that these incidents reports are non bias having found traces of C-4 explosives, grenades, homemade explosives, unscrewing-damage, vandalism of tracks , etc.
Where could any terrorists, criminal find the option and opportunity of having 12-15 million liters of high explosives, flammable liquids, free massive global media projection for the simple expense of unscrewing, damaging, vandalizing, explosive planting of a 100-120 rail car freight train in the developed World and especially in built up areas, towns and cities? The answer can´t to be to say that all rail networks have detection systems, sensors, 100% network security coverage but this isn´t so and no one can stop someone running up, braking a fence or even worse using themselves as a suicide bomb or internal secret cell employees who can do anything once in control of the asset as being part of their employment.
Again, why aren´t we preparing for the worst? If not for one’s own personal reasons or political, corporate agendas as being the possible cost, expense, investment in these safety and security technologies but at least for one’s own personal , social, environmental or corporate agendas as saving lives, protecting the environment, HSE of one’s employees, protecting national strategic infrastructures which are an obligation stated by parliament of the State, Government and not being “selective or cost cutting” as national security including economic national security always being paramount.
Without also taking into account the extreme cost increase in insurance premiums, liability costs, punitive legal damages, rail network repairs and even worse the cancellation and prohibition of rail freight transports of dangerous materials with the final cost being applied to the consumer as other routes and installations as new pipelines, road tankers would have to intake these closing of rail networks.
Presently the most efficient, effective and low cost method of transportation being rail freight and even more so as also being the most unregulated, nearly free from bureaucratic ties which at present benefits the whole petrol chemical industry thus at least if the Administration cannot withstand such investments at least some of the financial burden of the modernization, safety and security increase should be shared by the operators, clients via the purchase, use, lease of new protected and safety rail freight cars even if only used by these corporations which can be written, deducted via tax liabilities if all parties are interested in finding a real solution.
That´s why Technokontrol safety and security technologies aren´t a luxury but a must for any Administration, corporation, society, because no other present and foreseeable technologies can reduce, avoid , cancel and even less impede all of these types of risks and dangers in such a simple, effective and efficient manner thus shortly one will be able to see the full use globally of these safety technologies as being the only real and pragmatic solution in all ways of our daily lives from construction to industrial production, security to safety sectors, aviation to transportation…..
RAIL INCIDENTS
- 2013 via Rail Canada terrorism plot
- Major vulnerabilities to railway security
- With security eyes focused on airlines, terrorists look to rail
- Video of freight train hits fuel tanker
- Video of train explosion
- Video of massive explosion as us train derails
GAS CYLINDER INCIDENTS
TK Technologies Approved by IRTA & FIM
IRTA & FIM APPROVE TECHNOKONTROL SAFETY TECHNOLOGIES
News Update: IRTA (International Road Racing Teams Association) & the International Motorbike Federation (FIM) have confirmed the approval of TechnoKontrol Safety Technologies.
IRTA (International Road Racing Association) & FIM (International Motorbike Federation) have approved the use of Technokontrol Safety alloys in all motorbike formulas under their supervision.
As stated in the F.I.M. regulations such World Federation requires from the regulation side that all Fuel tanks that are not lined with a fuel cell bladder must be filled with an anti-explosion/fire retardant material. It is the teams responsibility to follow these regulations and if requested provide us with the necessary information to confirm this.
Thus Technokontrol entering also into the world of motor sports safety & security and also awaiting the final approval for more auto-sports championships and especially the Formula One Championship which are also undergoing final testing and technical due diligences.
Engineering Update
TECHNOKONTROL ENGINEERING TEAM UPDATE
IN THIS ISSUE
Engineering Update: Fuel Safety Testing
On the 12th March 2015 the Technokontrol Engineering Team has been holding safety, security and also fuel testing including fuel vaporization savings, sloshing liquid testing and many more technological tests in this highly technological based sector which are being tested for the introduction in the the World Motorbike Championship. These tests have been held at the Spanish F.I.M. Race course of Jerez, Spain. At the same time similar testing programs are being held for the Formula One World Racing around the World.
The greatest advantange has been discovering for its main usage in the Motor Sport sector is that the Technokontrol Alloys not only being safer and with longer durability than the normally used “foam” option but also having the extra benefit of being easily inserted/emptied in seconds/minutes into any fuel tanks in its “TK-Alloy ball format” and with the great advantage of not retaining “absorbing” any fuel capacity in its alloy formulations as these are metal 100% based which in comparison with the “foam” used has a fuel saving capacity of 4%-6% per fuel tank of fuel as “foam” being as a “sponge based” which absorbs the fuel and thus needing more fuel to take into account this loss of fuel capacity, thus more weight, less speed due to extra weight.
The fuel temperature has also been tested and confirming that using the “TK-Alloys” for these types of motorsport usage with high impact levels as “liquid sloshing” in the fuel tanks the temperature of the fuel stored remains lower thus having less vaporization, lower ignition points and with the even better less volatile chemicals being evaporated thus having and maintaining a higher quality fuel inside the fuel tank and with lower temperatures thus avoiding in having to “cool or freeze” the fuel tanks or fuels in each usage at test or racing levels.
Aircraft Update
TECHNOKONTROL AIRCRAFT UPDATE
IN THIS ISSUE
Engineering Update: Data Releases
Production Update: Supply Chain
Engineering Update: Data Releases
TK’s engineering team has continued to work with high
intensity during the fourth quarter of 2014 as the company prepares to begin
assembly of the first of the ALIEN BLACK NIGHT VIPER production aircraft with
its new Airbag, parachute, Angle of Attack Airbag Deployment Patented
Technologies.
This has resulted in the creation of hundreds of drawings each week by the
engineering team since October. There are over 1,400 unique parts in the ALIEN
BLACK NIGHT VIPER AIRCRAFT, and for each of these, TK engineers must identify
critical attributes such as geometry, location, material, fabrication
processes, as well as stress and performance calculations. All of this
information must be specified before the part can be released for manufacturing
and testing which is and always will be done by TK Aviation for all types of
RISK and CLIMATOLOGICAL scenarios.
TK design and manufacturing
engineers closely collaborate as the company gears up for production. The
result of this collaboration is hundreds of drawings, like the one shown above
for the ALIEN’s wheel-centering bracket for the nose gear.
TK’s engineers must also
design the manufacturing tools that will be used for every custom part of the
aircraft. Some of the ALIENS’s components are off the shelf, such as fasteners,
and others are specifically designed for the ALIEN, such as lighting.
In total, there are over 500
parts for which TK is designing laminate tooling that must be released, in
addition to the parts for the aircraft itself, and 260 of them have been
released to our manufacturers. With over 900 of the unique part designs already
released, TK is on schedule to begin the assembly of the first production
DIESEL POWERED, 120 BHP prototype aircraft engine and aircraft testing, ALIEN
DS004 (Engineering Serial Number DS004) in January 2014.
Pictured clockwise from left
is the metallic laminate tool process, from rough tool to finished tool and
then finished part from our supplier, Flying parts, which will be used to
create the Alien’s elevator skins.
Production Update: SupplyChain
As TK’s engineers work to
release the definition of the aircraft parts, TK’s operations team is
simultaneously ensuring that those parts are built on schedule and to TK’s
exacting standards, EASA safety procedures and regulations. In all, TK expects
to work with over 15 unique suppliers to build the ALIEN, and almost 100% of
those suppliers have already been identified, thus most in home and associated company’s
in other TK Technology markets.
The production team divides
the aircraft parts into two categories: commercial off-the-shelf parts (COTS)
and unique TK ALIEN design parts (Non-COTS). COTS are items that are not made
to a TK AVIATION-unique specification, such as fasteners and the AUDI DIESEL power
plant. Due to their unique design, Non-COTS parts of the ALIEN tend to require
longer lead times, and all long-lead procurement components (over 15 weeks) are
well underway.
In terms of both cost and physical dimensions, the largest component of the
aircraft is its composite airframe, which TK Aircraft is manufacturing at
Madrid facility alongside the EAGLE EYE and JET ALIEN ENGINE POWER PLANT
test-production lines.
The complex manufacturing process begins with a master design that TK releases
to a manufacturer who then mills a “positive” from a large block of
epoxy tooling board. TK AVIATION then uses the mold made from that master to
laminate the composite airframe components, which are, in turn, delivered to TK
for aircraft assembly. For large components, the mold is made of carbon fiber
(using the epoxy tooling board master), while smaller airframe components
employ metallic tools, which are CNC-machined from solid aluminum or steel
billets.
DRONE (Unmanned)/ Technology has been already incorporated in to the ALIENS and
EAGLE EYES software aviation – flight programs thus allowing the present ALIENS
and EAGLE EYES to fly as normal aircraft/amphibious with 4 different fuel power
plants, petrol 95, diesel, jet fuel J4/J5 and the new electromagnetic-electric
power plant with 120 bhp and a new record breaking low weight power plant of
under 20kg ready for 2014 engine testing program.
Last month TK technicians laid
up the carbon fiber mold for the right upper wing skin using a milled epoxy
board master (the light blue block beneath the carbon mold that is under
construction). Once this carbon mold is complete, TK will use it to laminate
wing skins for the prototype and production for ALIENS AIRCRAFT.
At this time, the masters for
the horizontal tail, wings, fuselage halves, and Water platforms are complete
and have been delivered to TK. Using these masters, TK has already made the
carbon fiber tools for the horizontal tail, wings, and fuselage halves and has
begun preparation for lay-up of the production aircraft components.
The TK team is on schedule to receive the first parts for DS004, the elevator
skins, in Madrid next month. These deliveries will mark the beginning of the
assembly of the first production Diesel Powered Alien Aircraft. Between now and
the end of April 2014, TK will receive over 1,000 parts at the company’s
assembly facility, which now has its operational inventory and warehousing
system in place.
At TK facility, technicians
use the completed Alien fuselage master to manufacture the molds that will be
used to make the fuselage skin of the Alien and Eagle Eye versions.
TK is pleased to announce the
appointment of two new Directors of Flight Training. Bringing a wealth of
aviation experience to his new role, joining TK AVIATION after a distinguished
career in the Spanish and UK Airforces.
Both having
surpassed over 5,000 flight hours in 25 different aircraft, 100 carrier
landings as an F/A-18, Tornadoes, Harrier Jump Jets and more than 130 combat
missions in Iraq and Afghanistan. They have led training squadrons in Europe and under NATO training, with
more than 30 instructors under their command during his role as Directors of
Operations for training at their corresponding bases and airforces.