TK-Global Technotelecom Mobile Network Telecommunications Projects & Programs
Which are the types of technologies and systems TK-Global Technotelecom offers to our global clients?
A mobile network operator or MNO is a provider of wireless communications services that owns or controls all the elements necessary to sell and deliver services to an end user including radio spectrum allocation, wireless network infrastructure, back haul infrastructure, billing, customer care and provisioning computer systems and marketing, customer care, provisioning and repair organizations.
A key defining characteristic of a mobile network operator is that an MNO must own or control access to a radio spectrum license from a regulatory or government entity. A second key defining characteristic of an MNO is that an MNO must own or control the elements of the network infrastructure that are necessary to provide services to subscribers over the licensed spectrum.
A mobile network operator typically also has the necessary provisioning, billing and customer care computer systems and the marketing, customer care and engineering organizations needed to sell, deliver and bill for services, however, an MNO can outsource any of these systems or functions and still be considered a mobile network operator.
Wireless communication is the transfer of information between two or more points that are not connected by an electrical conductor.
The most common wireless technologies use electromagnetic wireless telecommunications, such as radio.
With radio waves distances can be short, such as a few meters for television or as far as thousands or even millions of kilometers for deep-space radio communications.
It encompasses various types of fixed, mobile, and portable applications, including two-way radios, cellular telephones, personal digital assistants (PDAs), and wireless networking.
Other examples of applications of radio wireless technology include GPS units, garage door openers, wireless computer mice, keyboard sand headsets, headphones, radio receivers, satellite television, broadcast television and cordless telephones.
Radio spectrum refers to the part of the electromagnetic spectrum corresponding to radio frequencies – that is, frequencies lower than around 300 GHz (or, equivalently, wavelengths longer than about 1 mm).
TK-GLOBAL TECHNOTELECOM BACKHAUL NETWORKS
In a hierarchical telecommunications network the backhaul portion of the network comprises the intermediate links between the core network, or backbone network and the small sub networks at the “edge” of the entire hierarchical network.
In contracts pertaining to such networks, backhaul is the obligation to carry packets to and from that global network. A non-technical business definition of backhaul is the commercial wholesale bandwidth provider who offers Quality of service (QOS) guarantees to the retailer. It appears most often in telecommunications trade literature in this sense, whereby the backhaul connection is defined not technically but by who operates and manages it, and who takes legal responsibility for the connection or uptime to the Internet or 3G/4G network.
In both the technical and commercial definitions, backhaul generally refers to the side of the network that communicates with the global Internet, paid for at wholesale commercial access rates to or at an Ethernet Exchange or other core network access location. Sometimes middle mile networks exist between the customer’s own LAN and those exchanges.
Cell phones communicating with a single cell tower constitute a local sub network, the connection between the cell tower and the rest of the world begins with a backhaul link to the core of the Internet service provider’s network. The term backhaul may be used to describe the entire wired part of a network, although some networks have wireless instead of wired backhaul, in whole or in part, for example using microwave bands and mesh network and edge network topologies that may use a high-capacity wireless channel to get packets to the microwave or fiber links.
TK- GLOBAL TECHNOTELECOM CORE NETWORKS SYSTEMS
Visualizing the entire hierarchical network as a human skeleton, the core network would represent the spine, the backhaul links would be the limbs, the edge networks would be the hands and feet, and the individual links within those edge networks would be the fingers and toes.
Other examples include:
- Connecting wireless base stations to the corresponding base station controllers.
- Connecting DSLAMs to the nearest ATM or Ethernet aggregation node.
- Connecting a large company’s site to a metro Ethernet network.
- Connecting a submarine communications cable system landing point (which is usually in a remote location) with the main terrestrial telecommunications network of the country that the cable serves.
The choice of backhaul technology must take account of such parameters as capacity, cost, reach, and the need for such resources as frequency spectrum, optical fiber, wiring, or rights of way. Backhaul technologies include:
- FSO Free space optics
- Point-to-point microwave radio relay transmission (terrestrial or, in some cases, by satellite)
- Point-to-multipoint microwave-access technologies, such as LMDS, Wi-Fi, WiMAX, etc., can also function for backhauling purposes
- DSL variants, such as ADSL and SHDSL
- PDH and SDH/SONET interfaces, such as (fractional) E1/T1, E3, T3, STM-1/OC-3, etc.
- Ethernet
- Backhaul capacity can also be leased from another network operator, in which case that other network operator generally selects the technology.
TK-MESH NETWORKS FOR WIRELESS BACKHAUL
As data rates increase, the range of wireless network coverage is reduced, raising investment costs for building infrastructure with access points to cover service areas. Mesh networks are unique enablers that can reduce this cost due to their flexible architecture.
With mesh networking, access points are connected wirelessly and exchange data frames with each other to forward to/from a gateway point. Since a mesh requires no costly cable constructions for its backhaul network, it reduces total investment cost. Mesh technology’s capabilities can boost extending coverage of service areas easily and flexibly.
TK-GLOBAL TECHNOTELECOM DIFFERENT SOLUTIONS FOR EACH CLIENT, REGION AND/OR TECHNICAL REQUIREMENTS.
Many common wireless mesh network hotspots solutions are supported in open source router firmware including DD-WRT, Open WRT and derivatives. Sputnik Agent, Hotspot System, Chillispot and the ad-supported Anchor Free are four examples that work even with lower end routers like the WRT54G.
The IEEE 802.21 standard specifies basic capabilities for such systems including 802.11u unknown user authentication and 802.11s ad hoc wireless mesh networking support. Effectively these allow arbitrary wired net connections to be teamed or ganged into what appears to be a single backhaul – a “virtual private cloud”.
Proprietary networks from Meraki follow similar principles.
The use of the term backhaul to describe this type of connectivity may be controversial technically. They invert the business definition, as it is the customer who is providing the connectivity to the open Internet while the vendor is providing authentication and management services.
MOVING FROM WIRELESS BACKHAUL TO WIRED CONNECTIONS
In almost all ways except ease of deployment and ease of moving points of presence, wireless backhaul connections are inferior: They are slower, occupy spectrum that could be used by user devices (especially true as 5.8 GHz devices proliferate), require many more truck rolls as wired backhaul, are limited in capacity, and tend to have significantly worse latency and security than wired networks. They are often viewed as an initial or temporary measure.
TK-Global Technotelecom “Small Cell Signal Booster Telecommunication Innovation Systems & Technologies”.
TK-Global Technotelecom is a pioneer in small cell and femtocell technologies. Unlike other companies, TK-Global Technotelecom has also specialized in other formats as in the most advanced “Small Cells Signal Boosters”, and does not only produce technology at the core network end of a small cell solution, such as gateways and management systems.
This focus has resulted in a unique range of small cell technologies, and it has made it much easier to interoperate with gateway vendors, using open standard interfaces.
Technotelecom has developed a varied range of patented safety, security, law enforcement, military, telecommunications, surveillance technologies and systems that together address all of the novel requirements for a successful commercial deployment of all types of cells including “Small Cell Signal Boosters!:
- Interference – for “Small Cells Signal Boosters” to complement existing networks, they must not cause interference problems, and so must autonomously adapt to changing radio conditions.
- Scale – “Small Cells Signal Boosters” are being deployed in huge numbers, making traditional management methods impossible. “Small Cells Signal Boosters” must be self-managing, making their own decisions based on operator policies.
- High availability – in busy public access environments, “Small Cells Signal Boosters” must be able to meet the service quality KPIs of the macro network without manual engineering intervention.
- Resilience – with minimal manual intervention in set-up and operation, and situated at the end of a commodity backhaul connection, it is essential that “Small Cells Signal Boosters” have the systems to enable self-healing, recovery and upgrade.
- Group behavior – increasingly, mall cells are deployed in groups as self-organizing networks (SON). This extends the utility of “Small Cells Signal Boosters”, but places new demands on their ability to act autonomously.
- Applications – there is a great opportunity to serve and process content at the edge of the network, from inside small cells, where content is closer to mobile users. Specific new technology is required to make this happen.
Why should operators use Active RRM Radios Technologies?
One of several key requirements for operators deploying “Small Sells Signal Boosters” are that they should augment rather than adversely affect the operation and performance of the existing network. In order to achieve this, not only do the cells need to understand their relationship to the macro network on initialization, but they need to be able to adapt to changes as and when they occur.
TK-Global Techotelecom Radio RRM Network benefits.
TK-GLOBAL TECHNOTELECOM RRM Radios delivers the following benefits:
- Automatic identification of 2G, 3G and “Small Cell Signal Boosters” neighbors, technical partners & telecom assets associates via the system.
- Automatic power-setting, tracking systems to optimize coverage, whilst ensuring interference does not exceed levels that are pre-determined by operator policies.
- Automatically adjusts downlink power to that most suitable for the services being used, to minimize interference to nearby macro users.
- Automatic uplink power capping, to ensure “Small Cell Signal Boosters” users do not provide uplink interference to macro cells.
- Automatic data rate adaptation to optimize throughput, whilst responding to interference being experienced and generated by the “Small Cell Signal Boosters”.
TK-GLOBAL TECHNOTELECOM IN EMERGING NATIONS WITH NON/BASIC TELECOMUNICATION TECHNOLOGIES
Mobile operators face increasing customer demand to provide mobile coverage in rural and remote locations. For developing, emerging and developed regions, nations, continents the challenge is to provide national-extensive and even rural, long distance, un-populated based network coverage at an affordable cost, but which makes business sense to deploy.
In the majority of countries as in Africa, South America, coverage is still far from universal, even those that have well-developed networks. In more mature markets, in addition to basic voice coverage, there is now an expectation of mobile data to serve the growing population of smart phones and tablets.
The challenge for all emerging nations telecommunications systems and long distance rural coverage is cost-effectiveness, and in particular the costs of site acquisition, backhaul, power and equipment.
TK-Global Technotelecom technologies and systems including macro-cell coverage tend to be deployed to give as large a coverage area as possible, and a high proportion of users find themselves with relatively viable-operative signal levels but in many cases can find themselves out or range of these a coverage signal areas and thus not having a top level telecommunications system all the time and in all areas or regions.
“Small cell Signal Boosters” solutions have the advantage where they can be used to complement macro national, regional networks. They can be used to extend the overall coverage, either for pockets of population or along highways and railways; or they could be used to provide localized data capacity in locations where it would otherwise not be cost-effective.
The “Small Sells Signal Boosters” themselves are compact devices with low-power consumption, and are installed on existing street furniture or even on residential property, without the need for costly dedicated sites.
To make it easy to understand these systems are like “Small Integrated Signal Boosters”.
TK-Global Technotelecom Operational benefits in using different technologies in different areas with different issues becoming a “Custom made Solution” for our unique client.
Technotelecom emerging nations “Small Cell Booster Solutions” are proven to significantly reduce all of these costs. For backhaul, we use commodity broadband such as DSL, or even low-cost satellites operators anywhere over the globe for maximum coverage backup and coverage at all times and as extensive as possible.
- Field-proven – for reliable high coverage in outdoor-mountain, low level, town, city & rural locations and regions
- Small cell Signal Boosters coverage up to 3km – 16 voice calls, 14.4Mbps HSPA, up to 1W.
- Flexible sitting – multiple backhaul options.
- Provide a high-capacity solution close to the point of use, to match local concentrations of demand.
- Lifecycle management – providing operators complete control of the supply chain, assuring in-service reliability, preserving infrastructure independence and providing a platform for delivering new services.
TK-Global Technotelecom Solution Capabilities
RRM Radio Resource Management
TK-Global Technotelecom has developed unique radio, frequencies, resource algorithms, which mean that the unit(s) explore the radio environment to optimize the service provided to the user, while at the same time minimizing any possible disruption to the external macro network. These algorithms also enable full plug-and-play for the operator, by providing the ability to activate and upgrade “Small Cells Signal Boosters” remotely without affecting service.
Provisioning and automatic setup “Small Cells Signal Boosters” are pre-provisioned with basic configuration parameters so they know who they are and who they belong to. Once plugged in, operator policies are downloaded and the “Small Cells Signal Booster” simply adjust the radio configuration according to local conditions, within the required operational needs. They are then automatically tracked, traced, located and activated in a matter of minutes.
Listen Mode, UL/DL Power Setting. The “Small Cell Signal Booster” contains a downlink Listen Mode, which measures the interference levels of surrounding macro and “Small Cell Signal Boosters’ cells. Using Listen Mode, the Small Cell can select the settings for optimal performance for users of the” Small Cell Booster Systems” while minimizing the interference to the macro according to the operator’s policies, or can be configured by the network operator.
Once installed, the TK-Global Technotelecom “Small Cell Signal Booster Systems” –uniquely – can be configured to continue to monitor the radio environment and adapts to any changes it encounters.
- Dynamic Code and Downlink Power Reallocation. The “Small Cell Signal Booster” supports downlink power reallocation between individual data channels and/or between data channels and HSDPA.
- Downlink Power Adaptation. The “Small Cell Signal Booster’s initially sets its power levels based on the received signal levels it experiences from the macro network, in order to minimize uplink interference, including adjacent channel interference mitigation. These values are then dynamically altered according to the actual levels reported by the end user device through measurement reports.
- Continuous Fast Sniff. The “Small Cell Signal Booster” uniquely uses an active tracking, selection mode during normal operations to monitor changes in the radio environment, without affecting calls. When there are significant changes to the radio environment the addition/removal of a , partner, associate and/or neighboring “Small Cell Signal Booster” will adapt its power levels accordingly.
- Power Tuning. In order to ensure that a hotspot cell is attracting the right level of load, or if the load increases and additional capacity is not yet available, the cell can tune its coverage to maintain optimal throughput in the cell.
TK-Global Technotelecom operational benefits for the end-user/client.
The TK-Global “Small Cell Signal Booster” supports a broad range of call capabilities that meet or exceed mobile operators’ needs for subscribers. Equally of importance, all of these capabilities are already used in live commercial networks and, in the process, have been through rigorous testing and optimization cycles.
The system and technology can also be configured to treat voice coverage or data performance preferentially. This suits mobile operators targeting coverage-related market segments, or those who target 3G/4G performance as a selling proposition.
Below is a brief summary of the key call features we support:
- 8-16-Call.
- Video calling support.
- Supplementary Services Support.
- HD voice (WBAMR).
- Emergency Calls.
- HSDPA 14.4 Mbps.
- HSUPA 5.76 Mbps.
- Multiple Primary PDP Contexts.
- Cell FACH.
- Basic Data Rate Adaptation.
- Non-Standard UE Profiling & Corrective Actions.
- Advanced Data Rate Adaptation (Voice priority).
TK-Global Technotelecom Macro Network Interworking Technologies
TK-Global Technotelecom,’ “Small Cell Signal Booster” supports hand out of inter-frequency voice to the 2G (GERAN), and/or 3G macro network and hand out of video calls from the “Small Cell Signal Booster” to the cell to the 3G macro network only. Mobile operators can specify from their management system the priority of the handover type, and who gets the service.
TK-Global Technotelecom “Small Cell Signal Booster” supports the ability for the macro network to perform connected mode handovers of voice calls and data sessions.
Automatic Neighbour List Creation.
The TK-Global Technotelecom “Small Cell Signal Booster” listens for surrounding 2G and 3G cell sites and creates its own list of neighbouring cells, so mobile phones can seamlessly handout to the surrounding macro network without costly manual configuration back in the network.
TK-Global Technotelecom Operational Statistics and Diagnostics
The TK-Global Technotelecom “Small Cell Signal Booster” acts as a part of the mobile network infrastructure, while being an easy to setup and use enterprise device. It is configured and provisioned via a standards-based TR-069/196 management system, and provides alarms and performance data according to a DSL Forum specification (TR-096).
Initial connection and registration with the HMS (HNB Management System) is done securely, and, once operating, the “Small Cell Signal Booster” gathers performance management (PM) data over a period of time, placing it into a performance report.
Technotelecom has developed a highly flexible and comprehensive performance management reporting capability as a result of numerous commercial deployments. For example, the management system has full control over which counters are included in the report and the frequency at which the metrics are collected, and when the reports are started, stopped, and uploaded.
TK-Global Technotelecom Core Network Interfacing, Engine & Gateways
TK-Global Technotelecom “Small Cell Signal Booster Engine” supports up to four different network interface protocols for connection to “Small Cell Signal Booster Gateways”, allowing mobile operators to have the broadest choice of network gateway technologies and suppliers.
TK-Global Technotelecom Universal Mobile Telecommunications System (UMTS)
- InShare
- Comment
- RSS
- A
- AA
- AAA
UMTS (Universal Mobile Telecommunications System) is a so-called “third-generation (3G),”broadband , packet -based transmission of text, digitized voice, video, and multimedia at data rates up to and possibly higher than 2 megabits per second ( Mbps ), offering a consistent set of services to mobile computer and phone users no matter where they are located in the world.
Based on the Global System for Mobile ( GSM ) communication standard, UMTS, endorsed by major standards bodies and manufacturers, is the planned standard for mobile users around the world by 2010. Once UMTS is fully implemented, computer and phone users can be constantly attached to the Internet as they travel and, as they roaming service , have the same set of capabilities no matter where they travel to.
Users will have access through a combination of terrestrial wireless and satellite transmissions. Until UMTS is fully implemented, users can have multi-mode devices that switch to the currently available technology (such as GSM 900 and 1800).
Today’s cellular telephone systems are mainly circuit-switched , with connections always dependent on circuit availability. Packet-switched connection, using the Internet Protocol (IP), means that a virtual connection is always available to any other end point in the network.
It will also make it possible to provide new services, such as alternative billing methods (pay-per-bit, pay-per-session, flat rate, asymmetric bandwidth, and others).
The higher bandwidth of UMTS also promises new services, such as video conferencing. UMTS promises to realize the Virtual Home Environment (VHE) in which a roaming user can have the same services to which the user is accustomed when at home or in the office, through a combination of transparent terrestrial and satellite connections.
The electromagnetic radiation spectrum for UMTS has been identified as frequency bands 1885-2025 MHz for future IMT-2000 systems, and 1980-2010 MHz and 2170-2200 MHz for the satellite portion of UMTS systems.
UMTS supports maximum theoretical data transfer rates of 42 Mbit/s when HSPA+ is implemented in the network.[2] Users in deployed networks can expect a transfer rate of up to 384 kbit/s for Release ’99 (R99) handsets (the original UMTS release), and 7.2 Mbit/s for HSDPA handsets in the downlink connection. These speeds are significantly faster than the 9.6 kbit/s of a single GSM error-corrected circuit switched data channel, multiple 9.6 kbit/s channels in HSCSD and 14.4 kbit/s for CDMA One channel.
Since 2006, UMTS networks in many countries have been or are in the process of being upgraded with High Speed Downlink Packet Access (HSDPA), sometimes known as 3.5G. Currently, HSDPA enables downlink transfer speeds of up to 21 Mbit/s. Work is also progressing on improving the uplink transfer speed with the High-Speed Uplink Packet Access (HSUPA). Longer term, the 3GPP Long Term Evolution (LTE) project plans to move UMTS to 4G speeds of 100 Mbit/s down and 50 Mbit/s up, using a next generation air interface technology based upon orthogonal frequency-division multiplexing.
The first national consumer UMTS networks launched in 2002 with a heavy emphasis on Telco-provided mobile applications such as mobile TV and video calling. The high data speeds of UMTS are now most often utilized for Internet access: experience in Japan and elsewhere has shown that user demand for video calls is not high, and Telco-provided audio/video content has declined in popularity in favour of high-speed access to the World Wide Web—either directly on a handset or connected to a computer via Wi-Fi, Bluetooth or USB.
Global Radio Access Network – (UTRAN).
UMTS also specifies the Universal Terrestrial Radio Access Network (UTRAN), which is composed of multiple base stations, possibly using different terrestrial air interface standards and frequency bands.
UMTS and GSM/EDGE can share a Core Network (CN), making UTRAN an alternative radio access network to GERAN (GSM/EDGE RAN), and allowing (mostly) transparent switching between the RANs according to available coverage and service needs. Because of that, UMTS’s and GSM/EDGE’s radio access networks are sometimes collectively referred to as UTRAN/GERAN.
UMTS networks are often combined with GSM/EDGE, the latter of which is also a part of IMT-2000.
The UE (User Equipment) interface of the RAN (Radio Access Network) primarily consists of RRC (Radio Resource Control), RLC (Radio Link Control) and MAC (Media Access Control) protocols. RRC protocol handles connection establishment, measurements, radio bearer services, security and handover decisions. RLC protocol primarily divides into three Modes—Transparent Mode (TM), Unacknowledged Mode (UM), Acknowledge Mode (AM). The functionality of AM entity resembles TCP operation whereas UM operation resembles UDP operation. In TM mode, data will be sent to lower layers without adding any header to SDU of higher layers. MAC handles the scheduling of data on air interface depending on higher layer (RRC) configured parameters.
The set of properties related to data transmission is called Radio Bearer (RB). This set of properties decides the maximum allowed data in a TTI (Transmission Time Interval). RB includes RLC information and RB mapping. RB mapping decides the mapping between RB<->logical channel<->transport channel. Signaling messages are sent on Signaling Radio Bearers (SRBs) and data packets (either CS or PS) are sent on data RBs. RRC and NAS messages go on SRBs.
Security includes two procedures: integrity and ciphering. Integrity validates the resource of messages and also makes sure that no one (third/unknown party) on the radio interface has modified the messages. Ciphering ensures that no one listens to your data on the air interface. Both integrity and ciphering are applied for SRBs whereas only ciphering is applied for data RBs.
Global Core Networks
With Mobile Application Part, UMTS uses the same core network standard as GSM/EDGE. This allows a simple migration for existing GSM operators. However, the migration path to UMTS is still costly: while much of the core infrastructure is shared with GSM, the cost of obtaining new spectrum licenses and overlaying UMTS at existing towers is high.
The CN can be connected to various backbone networks, such as the Internet or an Integrated Services Digital Network (ISDN) telephone network. UMTS (and GERAN) include the three lowest layers of OSI model. The network layer (OSI 3) includes the Radio Resource Management protocol (RRM) that manages the bearer channels between the mobile terminals and the fixed network, including the handovers.
Spectrum and Signal – Frequencies Allocations
Over 130 licenses have already been awarded to operators worldwide (as of December 2004), specifying W-CDMA radio access technology that builds on GSM.
In Europe, the license process occurred at the tail end of the technology bubble, and the auction mechanisms for allocation set up in some countries resulted in some extremely high prices being paid for the original 2100 MHz licenses, notably in the UK and Germany. In Germany, bidders paid a total €50.8 billion for six licenses, two of which were subsequently abandoned and written off by their purchasers (command the Sonera/Telefonica consortium).
It has been suggested that these huge license fees have the character of a very large tax paid on future income expected many years down the road. In any event, the high prices paid put some European telecom operators close to bankruptcy (most notably KPN).
Over the last few years some operators have written off some or all of the license costs. Between 2007 and 2009 all three Finnish carriers begun to use 900 MHz UMTS in a shared arrangement with its surrounding 2G GSM base stations for rural area coverage, a trend that is expected to expand over Europe in the next 1–3 years.
The 2100 MHz band (downlink around 2100 MHz and uplink around 1900 MHz) allocated for UMTS in Europe and most of Asia is already used in North America. The 1900 MHz range is used for 2G (PCS) services, and 2100 MHz range is used for satellite communications. Regulators have, however, freed up some of the 2100 MHz range for 3G services, together with a different range around 1700 MHz for the uplink.
AT&T Wireless launched UMTS services in the United States by the end of 2004 strictly using the existing 1900 MHz spectrum allocated for 2G PCS services. Cingular acquired AT&T Wireless in 2004 and has since then launched UMTS in select US cities. Cingular renamed itself AT&T Mobility and is rolling out some cities with a UMTS network at 850 MHz to enhance its existing UMTS network at 1900 MHz and now offers subscribers a number of dual-band UMTS 850/1900 phones.
T-Mobile’s rollout of UMTS in the US focused on the 1700 MHz band.